Home About us Products Online AD Guestbook Contact us   CHINESE | Mail to us
Dear:
  Hello
  You already succeed in at this station of the log-in, and have the right to look over a copy of new products of Web site and have the right to order the products online!
 Chuangmei Products
Our Showroom
Introduction of the products
Technological Process
Quality certificate
Sales Service
  Orders or Questions?
 
  Tel:86-579-85220525  
          85220606  
  Fax:86-579-85220529  
 
 
  E-mail:ywcm0579@163.com  
        
 Introduction of the products

Boss table 、 File cabinet、 Meeting table series
One.High-level Production
1. Materials
(1).The surface and side are made of log togument. The variety includes:American import walnut. Its characteristics are as follows:Hard lignin,strong toughness and shock resistance,clear texture,wooden depth of hole,color neutrality,suits paints the black Hu peach-color,acid color ,millet color and so on.After the painting,it is extremely attractive.The product reveals upscale,the personal status nature is unique,but the material cost is high.
Domestic northeast mallotus japonicus wood.
Its characteristics are:
Lignin degree of hardness center,the texture approaches the walnut,it is difficult to distinguish for amateurs,wooden hole slightly shallow,color shallow,spurts color can be chosen widely, from shallowly to deep.After the painting,it can compare favorably with the walnut,and the acquisition of material costs moderately,And it has gained the market popularity. But there are many black scars,it needs the essence to choose the material.

(2).All base material uses the high quality center density fiberboard(MDE).After drying,insect proofing,anticorrosion chemical processings,the formaldehyde content and each target achieves national standard.Its characteristics are as follows:The high wooden grain of density、low moisture content、does not distort、the superficial polishing smoothly、to be smooth That has built the good foundation for the product quality, It is the first choice base material for present beat furniture.
The high quality hardware fitting, includes three axles、locking device、hinge and each kind of bridge piece.Three axles will use the exportation extension "Yong Qiang" brand axle.Its steel products hard but not to distort、walks the bead nimbly to pull and push、the noise extremely low.The Taiwan locking device will open nimbly.
Taiwan "Da Bao" senior gathering fat paint.
Its characteristics are as follows: High degree of hardness,sttrong bearing blows,the transparency well, gloss gentle, lasting, flatness to be good, smooth to touch, just like the baby skin.It is the most senior paint in the present domestic furniture profession.And it is also the the first choice brand for the producing upscale furniture factory.

2.Technics
The international brand furniture has been received the favour of the high consumption level by its perfect fine craft.If said it is a furniture, not to say is a handicraft.U.S .A,England as well as Germany European Union country like the classical furniture,but its structure、craft are quite complex.European Union partial countries like Italy likes the simple、sprightly、steel structure and line、simple modelling and craft furniture.That suits the factory which has the entire automatic production equipment to produce mass. Mideast because of successive year- flames of unceasing war , the furniture demand is very big.China nearly becomes their OEM production base, and is also the world furniture O E M production base. In view of the fact that the overseas customer strictly requests for the production and the understanding to the internationalfurniture industry , in the product manufacture aspect,our company has positively learnt the model and absorped the international advanced production craft,and purchased the Germany 、 Italian most advanced production equipment, strengthened the automatic production craft; Inthe product design aspect, We have profited from the overseas style to unify Chinese characteristic.And unifying each stratification of the market to provide conforms to the Chinese attitude toward consumption product.

3.Quality
First strictly purchases the raw material the quality pass,professional IQC rests on the international examination to possess expects front.Each working procedure from opening the material from the carpentry to produce goods to the packing passes through the professional QC examination. Achieves that inferior goods inflow the next working procedure, and the next working procedure doesn't accept the inferior goods above .Eliminates the inferior goods in this working procedure. After checking at each level, complete each product.

Two.Middle-grade product

1.Material
(1).Imitating wooden patterned paper cover,Japanese raw material,domestic Shenzhen producing.The wood grain is the same as the log skin .Each kind of color is suitable.But that lacks a kind of natural feeling.The material cost is low,andthat will reduce the production cost.
(2).The high quality hardware fitting, includes three axles、locking device、hinge and each kind of bridge piece.Three axles will use the exportation extension "Yong Qiang" brand axle. Its steel products hard but not to distort、walks the bead nimbly to pull and push、the noise extremely low.The Taiwan locking device will open nimbly.
(3).Taiwan "Da Bao" senior gathering fat paint.
Its characteristics are as follows: High degree of hardness,sttrong bearing blows,the transparency well, gloss gentle, lasting, flatness to be good, smooth to touch, just like the baby skin.It is the most senior paint in the present domestic furniture profession.And it is also the the first choice brand for the producing upscale furniture factory.

2.Technics
The majority of productionfactories inland use the traditional process that the half-finished product is conglutinated with the ash and polished by the manual label.
This procedure has affected the cover bonding strength directly,especially when there is a big change in temperature and humidity.And the table pole of the face is easy to delaminate.But our company uses the mechanization to spread rubber,mechanized cover,the mechanization drenching the oil and immediate high temperature
drying.The surfacing bears delimits(Other crafts are the same as the upscale products)

3.Quality:It's the same as the upscale products.


Chair Series
One.High-level Production
1. Materials
(1). Italian import cowhide (including half ilex macropoda、more thick cowhide and so on) Its characteristics are as follows:The texture is exquisite,feel is soft,the feeling of falling is good,surface glossiness is good,the permeability is strong.
(2). The thermo-compression bending shape board can endure the 300kg pressure,after moisture-proof,guards against corrosion,insectproof chemical processing.Based on human body engineering principle design,the chair uses the 45# density soak cotton and kapok ultra to glue a 40# density softly soak cotton and kapok.It is moderate to sit and rich elasticity;The chairback ultra uses the 40# density softly to soak the cotton and kapok to glue on the bending plade .
(3).Oak armrest,oak chassis as well as oak footrest,the clear wood grain,revealing the elegant demeanor of the log texture .
(4).Taiwan air cylinder and Taiwan plane seat
(5). Mucilage glueuse uses the benzene rubberwh
ich is harmless to the human body ,guaranteeing the human body health.

2.Technics
Using Japanese "pair of vehicle sewing thread" specially made clothes vehicle,professionally tailor extra thick work piece.Uniformity、beauty and duration, together with the lining spurt collodion,molds your exquisite build chair.

3.Patterns
Following closely to the trends of the world,renewing unceasingly,rich vogue and comfort.

Two.Middle-grade product
1.Material
Domestical cylinder and foundation,soft gum arm rest,soft gum chassis,hemp fabric lining or import xipi.

2.Technics and Patterns
They are the same as the upscale products.

Sofa Series
One.High-level Production
1.Material:
(1). Italian import cowhide (including half ilex macropoda、more thick cowhide and so on) Its characteristics are as follows:The texture is exquisite,feel is soft,the feeling of falling is good,surface glossiness is good,the permeability is strong.
(2).The cushion uses the 50# density soak cotton and kapok ultra to glue a 40# density softly to soak cotton and kapok and then uses 2-3mm spurt collodion.Make the cushion moderateto sit nd rich elasticity.
(3).The back uses the 45# density soak cotton and kapok to mold the shape.The surface pastes spurt collodion.The internal frame uses the superior lumber.The material quality is hard and rigid.The moisture content is smaller than 10%.Anticorrosion,Insect proofing,not distorting.
(4).The outside wooden frame uses barks or the bending-wood .Complete it by Polishing the painting many times.The degree of hardness of the paint surface is high.The wood grain is clear.That will reveal the elegant demeanor of the log texture .

2.Technics
It is the same as the upscale chair series products.


3.Patterns
Following closely to the trends of the world,renewing unceasingly,rich vogue and comfort.Designing the different pattern according to the different level,satisfies various demand.

Two.Middle-grade product

1.Material
Domestical cowhide.Its characteristics are as follows:The feeling is slightly thick.The luster and feeling are also slightly inferior.But the material cost is slightly low.
2.Technics and Patterns
They are the same as the upscale products.

Screen Series

Material:
The frame is composed of each kind of aluminum molding. And glues various female hemps fabric lining on the filament board .Also can select the aluminum board or the steel plate.
Environment Creates Benefits......
Home - About us - Products Catalog - Contact us - Service
 Tel: 86-579-5220525 5220606   / Fax:86-579-5220529  / E-mail:ywcm@ywcm.com
Copyright © 2005 YWCM.COM inc. All rights reasrved.